Netgear 700 Series Managed Switch for Software v2.1 User Manual download pdf (Page 110)

700 Series Managed Switch User’s Guide for Software v2.1

6-20 Command Line Interface

SM-10004-02

Static

The Static Addresses Table, allows the administrator to specify Media Access Control (MAC)

addresses for specific ports that will not be purged from the bridge table by the aging function.

Syntax

FSM726(config)# mac-address-table static <mac-address> <ethernet interface number>

Where

<mac-address> = The MAC address you wish to keep on the table regardless of aging timers.

The MAC address is a 48-bit string, expressed in hexadecimal with a colon separating every 8 bits.

For example, 00:2d:3f:22:11:54.

<ethernet interface number> = The Ethernet interface associated with the MAC address

you specified. The interface number is expressed in x/y format, where x is the stack number

(always 1 in the case with FSM726), and y is the port number.

Multicast-Static

You can use this menu t configure permanently reachable multicast groups. The Static

Multicast

command let you create individual groups by entering the MAC address of static

group

Syntax

FSM726(config)# mac-address-table multicast-static <mac-address> ethernet <interface

number>

Where

<mac-address> = the MAC address you wish to place into the static multicast group.

<interface number> = the Ethernet interface associated with the static multicast group.

For example, if you want to add port 5 to static multicast group aa:aa:aa:10:30:3f, the command to

do so would be

FSM726(config)# mac-address-table multicast static aa:aa:aa:10:30:3f ethernet 1/5

Disable

The disable command disables the switch’s dynamic address learning capability.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 151 152

No comments

Netgear 700 Series Managed Switch for Software v2.1 User Manual Page 110