Supported AT Command Reference
42 2130617
!SCACT? [<pid>]
!SCACT=<state>[, <pid>]
Supporting modems:
• All
Activates / deactivates PDP context for FIFO interface
This command is used to activate or deactivate the specified PDP context for
FIFO interface.
Usage:
• AT!SCACT?[<pid>] reports the status of the identified profile (<pid>). If no
<pid> is specified, the status of all profiles is returned.
• AT!SCACT=<state>[,<pid>] is used to set the state of the identified profile
(<pid>). If no <pid> is specified, profile 1 is updated.
Parameters:
<state> (PDP context activation state):
• 0 = Deactivated
• 1 = Activated
• During assignment, any <state> other than 1 or 2 will return an ERROR
response.
<pid> (PDP context definition):
• Valid range: 1–16
!SCDFTPROF?
!SCDFTPROF=<pid>
Supporting modems:
• All
Queries / sets the default profile ID
This command is used to query / set the default profile ID.
Usage:
• AT!SCDFTPROF? returns the default profile ID (<pid>).
• AT!SCDFTPROF=<pid> sets the default profile ID to <pid>.
Parameters:
<pid> (Profile ID):
• Valid range: 1–16 — a valid profile ID that will be used as the default
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description
Comments to this Manuals