Netgear AirCard 875 (all others) User's Guide Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 76
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
Supported AT Command Reference
34 2130617
!GCIPHER = <setting>
!GCIPHER?
Supporting modems:
All
Enables / disables ciphering and integrity settings
To register onto a network with WCDMA service, the modem’s ciphering and
integrity settings must be enabled or disabled to match the network settings.
Most carriers enable both ciphering and integrity.
When testing the modem, you may be using a SIM that has different codes
for ciphering and integrity than those used by the test system. In this case,
you may need to disable ciphering and integrity checking to use the test
system.
Usage:
AT!GCIPHER=<setting> sets the ciphering and integrity settings.
AT!GCIPHER? reports the current ciphering and integrity settings
(0=disabled, 1=enabled).
Parameters:
<setting> (enable / disable ciphering and integrity):
0 = ciphering disabled; integrity disabled
1 = ciphering enabled; integrity disabled
2 = ciphering enabled; integrity enabled
3 = ciphering disabled; integrity enabled
!GETBAND?
Supporting modems:
All
Returns the current active band
This command returns the active band currently being used by the modem.
Usage:
AT!GETBAND? returns a description of the current active band, or returns
an error message.
Note: Due to stack implementation requirements, !GETBAND reports W800
for both W800 and W850.
!GETRAT?
Supporting modems:
All
Returns the current active radio access technology (RAT)
This command returns the RAT currently being used by the modem.
Usage:
AT!GETRAT? returns a description of the current RAT, or returns an error
message.
Table 3-2: Modem status, customization, and reset commands (Continued)
Command Description
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 75 76

Comments to this Manuals

No comments