Netgear AirCard 875 (all others) User's Guide download pdf (Page 32)

Supported AT Command Reference

32 2130617

+CQI?

+CQI=<enableFlag>

Supporting modems:

• All

Returns or enables / disables return of averaged CQI

(Channel Quality Indicator) value (WCDMA only)

This command returns the averaged CQI from the modem.

Usage:

• AT!CQI? returns the average CQI and the number of samples used to

determine the average. For example:

+CQI:

total valid samples 1600, average cqi 26

• AT!CQI=<enableFlag> enables or disables the query version of the

command (+CQI?)

Parameters:

<enableFlag> (enable / disable CQI value retrieval):

• 0 = Disable retrieval

• 1 = Enable retrieval

CSDONSIO2?

!CSDONSIO2=<port#>

Supporting modems:

• All

Configures secondary SIO port for circuit-switched data

This command configures the secondary serial I/O (SIO) port for circuit-

switched data over the main AT port or MUX1

/ MUX2 / MUX3.

Note: The modem must be reset before any change takes effect.

Usage:

• AT!CSDONSIO2? returns the current port number currently used for the

SIO port. For example:

+CSDONSIO2:

<port#>

• AT!CSDONSIO2=<port#> sets the port number to use for the SIO port.

Parameters:

<port#> (Port used for circuit-switched data):

• 0 = CSD on main AT port (Default)

• 1 = CSD on MUX1

• 2 = CSD on MUX2

• 3 = CSD on MUX3

Table 3-2: Modem status, customization, and reset commands (Continued)

Command Description

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 75 76

Comments to this Manuals

No comments

Netgear AirCard 875 (all others) User's Guide Page 32

Comments to this Manuals

Related products and manuals for Cellular wireless network equipment Netgear AirCard 875 (all others)