Netgear WG111U User Manual download pdf (Page 95)

User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U

Preparing Your Network to Work with a Router Appendix C-15

202-10065-01

3. Set the TCP/IP Properties.

The TCP/IP Properties dialog box displays.

a. Click the IP Address tab.

b. Select the radio button marked

“Obtain an IP address from a DHCP server”.

c. Click OK. This completes the configuration of

TCP/IP in Windows NT for this computer.

d. Restart the computer.

e. Repeat these steps for each computer with this

version of Windows on your network.

Verifying TCP/IP Properties for Windows XP, 2000, and NT4

To check your computer’s TCP/IP configuration:

1. On the Windows taskbar, click the Start button, and then click Run.

The Run window opens.

2. Type cmd and then click OK.

A command window opens.

3. Type ipconfig /all

Your IP Configuration information is listed, and should match the values below if you are

using the default TCP/IP settings that NETGEAR recommends for connecting through a

router or gateway.

4. Type exit

TCP/IP Configuration Current NETGEAR Standard Previous NETGEAR Standard

Computer or workstation

IP Address

192.168.1.2 through

192.168.1.254

192.168.0.2 through

192.168.0.254

Subnet mask 255.255.255.0 255.255.255.0

Gateway address for router 192.168.1.1 default address 192.168.0.1 default address

1 2 ... 90 91 92 93 94 95 96 97 98 99 100 ... 107 108

No comments

Netgear WG111U User Manual Page 95