Netgear WG111U User Manual download pdf (Page 44)

User’s Manual for the NETGEAR Super AG Wireless USB 2.0 Adapter WG111U

4-6 Configuration

202-10065-01

Note: The channel number differs depending on the country. The connection speed

automatically defaults to the highest speed.

e. Click OK. The WG111U will scan the area to determine which channel to use.

f. Click Apply.

3. Save your settings in a Profile.

a. Type a descriptive name in the “Profiles” field.

b. Click Save Profile. All the configuration settings are saved in this profile.

c. Click Apply.

d. Click Close to exit the configuration utility.

4. Verify wireless connectivity between your peer devices.

Verify connectivity by using the Ping program:

a. On the Windows taskbar click the Start button, and then click Run.

b. Assuming the target PC is configured with 192.168.0.1 as its IP address, type

ping -t 192.168.0.1 and then click OK.

c. This will cause a continuous ping to be sent to the device with the 192.168.0.1 static IP

address. The ping response should change to “reply.”

At this point the connection is established.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 107 108

No comments

Netgear WG111U User Manual Page 44