Netgear 771S User's Guide download pdf (Page 127)

3. Beside Wi-Fi Info on Home, select Show or Hide.

4. Click Submit.

Enable / Disable the Block List

You can enable your NETGEAR Zing Mobile Hotspot’s block list on your device’s Wi-Fi Block

List screen, and on the Zing Manager’s Wi-Fi MAC Filter page. This lets you identify devices

that should not be allowed to access your Wi-Fi networks.

On the Touchscreen

1. Tap > Wi-Fi.

2. Tap Block List.

3. Tap On to block devices, or tap Off to stop blocking devices.

In the Zing Manager (http://sprinthotspot)

1. Log in to the home page. (See Logging In as an Administrator.)

2. Click Wi-Fi > MAC Filter.

3. Beside MAC Filter Mode, select Black List to block devices, or select None to stop

blocking devices.

4. Click Submit.

Displaying and Blocking Currently Connected Devices (Block List)

To detect a potential intruder, you may want to display a list of the Wi-Fi-enabled devices that

are currently connected to your NETGEAR Zing Mobile Hotspot. You can display this list on

your device’s Devices screen, and on the Zing Manager’s home page.

If you want to stop a device from connecting to your network, you can add it to your device’s

block list. The blocked device will not be able to connect again until you choose to unblock it.

(See View and Unblock Devices (Block List).)

Note: You have to enable the block list before you can block devices from using your Wi-Fi

networks. (See Enable / Disable the Block List.)

On the Touchscreen

1. Tap > Devices. A list of the devices connected to your Main and Guest Wi-Fi

networks appears. If you do not want to block a device, return to the home screen.

2. If you want to block a listed device, tap the device name. The device’s IP address

and MAC address display.

Configuring the Wi-Fi Network 119

1 2 ... 122 123 124 125 126 127 128 129 130 131 132 ... 204 205

No comments

Netgear 771S User's Guide Page 127