Netgear 771S User's Guide download pdf (Page 118)

Resetting to Factory Default Settings

In some cases you will need to reset your device’s software to its factory default settings.

WARNING: If you reset the software to default settings, you must go through the device

setup, as if you’ve just purchased your device. (See Starting Your Device for the

First Time.)

You’ll need to reset the software to default settings if:

● You’ve forgotten the administrator password.

● You’ve changed the DHCP settings such that your device is inoperable. (For example,

there’s no communication with your device.)

You can reset your device to factory settings from your device’s Reset screen, or from the Zing

Manager’s Software and Reset page.

Note: All connected devices will be disconnected and your device will reboot automatically.

On the Touchscreen

Note: You can only do a factory reset of your device with Sprint’s assistance. Contact Sprint

Customer Service to obtain an SPC code that you will need to enter to perform the reset.

1. Tap > Settings > Reset.

2. Tap Factory Reset.

3. Tap Yes.

4. Tap Enter MSL.

5. Use the on-screen keypad to enter the MSL code, then tap OK.

6. Tap Begin Reset.

In the Zing Manager (http://sprinthotspot)

Note: You can only do a factory reset of your device with Sprint’s assistance. Contact Sprint

Customer Service to obtain an SPC code that you will need to enter to perform the reset.

1. Log in to the home page. (See Logging In as an Administrator.)

2. Click Settings > General > Software and Reset.

3. Below Factory Reset, click Reset.

4. Enter the MSL code provided by Sprint, then click Submit.

5. Click Begin Reset.

Software and Reset 110

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 204 205

No comments

Netgear 771S User's Guide Page 118