Netgear WN3100RP User's Guide Page 37

  • Download
  • Add to my manuals
  • Print
  • Page
    / 47
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 36
Extender Network Settings
37
Universal Pass Through WiFi Range Extender WN3100RP
CAUTION:
Once you start the firmware upgrade, do not try to go online, turn off the
extender, shut down the computer, or do anything else to the extender
until it finishes restarting.
Advanced Wireless Settings
The extender is set up with the optimum settings. Do not alter these settings unless directed
by NETGEAR support. Incorrect settings might disable the extender unexpectedly.
To view or change the advanced wireless settings:
1. Select Advanced > Wireless Settings
.
The following screen displays:
2. View or configure the following settings:
Enable Wireless
Access Point. Select this check box to enable the extender to work
as a wireless access point. If this check box is cleared, then computers or wireless
devices cannot connect wirelessly to the extender.
Enable SSID Broadcast. Select this check box to enable the extender to broadcast
its wireless network name (SSID). If this check box is cleared, then the wireless
network is hidden. T
o join a hidden wireless network, type the wireless name.
Disable Device’s PIN
. Select this check box to disable the extender’s PIN. The PIN
can be used for a WPS wireless connection.
Keep Existing Wireless Settings. Select this check box to keep the settings in the
Wireless Settings screen unchanged when a wireless connection is made with WPS.
Setup Access List. Specify a list of computers or wireless devices that are allowed to
connect to the network.
Page view 36
1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 46 47

Comments to this Manuals

No comments