Netgear WN3100RP User's Guide Page 32

  • Download
  • Add to my manuals
  • Print
  • Page
    / 47
  • Table of contents
  • TROUBLESHOOTING
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 31
Extender Network Settings
32
Universal Pass Through WiFi Range Extender WN3100RP
- Link Rate. The actual transmission (Tx) and receive (Rx) link rate in the current
wireless connection.
- Connection Status. The status of your wireless connection (connected or
disconnected).
Extender IP Info
:
- MAC Address.
The physical address of the extender, as seen from the local area
network (LAN).
-
IP Address. The IP address of the extender.
The default is 192.168.1.250.
- DHCP Client. The network DHCP client on the wireless network.
- IP Subnet Mask. The IP subnet mask associated with the LAN IP address of the
extender.
The default is 255.255.255.0.
- Gateway IP Address
. The IP address of the wireless network gateway.
- Domain Name Server. The IP address of the Domain Name Server (DNS) of the
wireless network.
Extender Wireless Settings
:
- Name (SSID). The name (SSID) of the wireless network.
-
Region. The country where the extender is set up for use.
-
Channel. The current channel, which determines the operating frequency
.
- Wireless mode.
The maximum data rate of the wireless connection.
- Wireless AP. Indicates if the access point (AP) feature is enabled.
-
Broadcast Name. Indicates if the extender is configured to broadcast its SSID.
- W
i-Fi Protected Setup. Indicates whether Wi-Fi Protected Setup is configured.
To view the statistics of your connections:
On the Status screen, click the Show Statistics button.
A screen similar to the following displays:
Page view 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 46 47

Comments to this Manuals

No comments