Netgear WN3100RP User's Guide download pdf (Page 14)

Getting Started

Universal Pass Through WiFi Range Extender WN3100RP

• Make sure that your Ethernet cable is securely connected to the extender and to the

computer. If the cable is not securely connected, reconnect the Ethernet cable and

relaunch your Internet browser.

Install the Extender

Place the extender, apply power, and connect it to your WiFi network.

Place the Extender and Power It On

1. Place the extender halfway between your router or gateway and the location that has

poor WiFi coverage.

If it is not possible to place the extender at the halfway point, move the extender closer to

the location with poor coverage, but still within the wireless range of the router or

gateway.

2. Turn the On/Of

f switch on the side of the extender to the On position.

On/Off switch

3. Plug the extender into a power outlet and wait one minute until the extender starts.

The Power LED lights green.

4. Connect the extender to your WiFi network.

a. Connect the extender to your router or gateway

For more information, see

Connect the Extender to Your WiFi Network on page 15.

b. Connect your clients to your extender.

For more information, see Join the Extender WiFi Network on page 16.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 46 47

No comments

Netgear WN3100RP User's Guide Page 14