Netgear WN3000RPv3 Installation Guide download pdf (Page 7)

Connect with WPS

Wi-Fi Protected Setup (WPS) lets you join a secure WiFi network without

typing the network name and password.

Note: WPS does not support WEP network security. If you are using WEP

security, follow the instructions in Connect with Web Browser Setup on

page 8

1. Press the WPS button on the side panel of the extender.

The WPS LED blinks.

2. Within two minutes, press the WPS button on your router or access

point.

The WPS LED on the extender lights solid green, the Router Link LED

lights, and the extender connects to your existing WiFi network.

If the Router Link LED does not light, try again. If it still does not light,

see Connect with Web Browser Setup on page 8.

3. Find the new extender network name.

The extender’s wireless network name (SSID) changes to your existing

WiFi network name, with _EXT at the end of the name, for example:

• Existing WiFi network name. MyNetworkName

• New extended network name. MyNetworkName_EXT

1 2 3 4 5 6 7 8 9 10 11 12 ... 19 20

No comments

Netgear WN3000RPv3 Installation Guide Page 7